No products in the cart.
How to Measure an Undermount Sink: Expert Advice for a Complete Guide
An undermount sink is a great option for many kitchens due to its sleek, modern look. However, this type of sink requires precise measuring in order to install it correctly and prevent any issues with plumbing. This article goes over everything you need to measure an undermount sink so that you can be sure it will fit perfectly in your kitchen!
how to measure undermount sink?
- With a ruler
- With a tape measure
- Using geometry
- From the diagram on the sink manufacturers website or packaging
Method One: Measuring With a Ruler
This is the most basic way to measure an undermount sink. All you need is a ruler or measuring tape and a level surface.
Step #1: Measure the Width
The width of an undermount sink is measured from side to side. Measure at two different points along the back, making sure that you are measuring exactly across from one another. Make a mark where each point intersects with the edge of the countertop or other surface on which you will be installing your new sink.
Step #: Measure the Height
Next, measure from one side to the other. This measurement should be taken at two different points as well. Draw a line across where each point intersects with the edge of your countertop or surface on which you will be installing your sink.
Method Two: Measuring With a Tape Measure
Taking accurate measurements with a tape measure is just about as easy as using a ruler. This method may be better for those who are uncomfortable with using a ruler or want to be extra sure of their measurements.
Step #1: Measure the Width
Measure at two different points along the back of your sink, making sure that you are measuring exactly across from one another. Make a mark where each point intersects with the edge of the countertop or other surface on which you will be installing your new sink.
Step #2: Measure the Height
Now that these dimensions have been marked, draw lines connecting them together and extend them under the countertop. As long as your lines are straight and continue to connect, it is guaranteed that you will have a level surface in which to install your new sink!
Did you know? At TORVA, we provide precise dimension data. Register as a TORVA dealer and unlock more advantages now!
Method Three: Measuring With Geometry
If you’re not confident with using tools or just want another method to ensure accuracy, you can use geometry to measure your undermount sink.
Step #1: Measure the Height of One Side
Take one side of your sink and find the shortest distance between the corner point and partway down where it meets with another angle (you will want this length). Draw a line from this mark at an angle across to the other side of the sink. Now, measure the distance between this line and the opposite corner point. This is your height measurement.
Step #2: Measure the Width of One Side
Measure from one corner to another at its widest point on one side of your sink (you will want this length). Draw a line from this mark at an angle across to the other side of the sink. Now, measure from this line at its widest point to where it intersects with another angle on that same side (you will want this length). Draw a horizontal line extending these two measurements and you have your width measurement!
Step #3: Find the Length and Width Together
Now all you have to do is find the height of one side by measuring from corner to corner at its shortest distance, and then finding the length and width together. If you are comfortable with geometry or would like another way to confirm your measurements, this may be a good option for you!
Method Four: Measuring With an Undermount Sink Template
If you’re not confident in your measurements or just want to be extra sure, an undermount sink template can take all the guesswork out of it. This is a plastic or metal template that will have the exact dimensions of your chosen sink.
Step #1: Find and Purchase an Undermount Sink Template
There are many options to choose from, so you are sure to find one that fits your budget. If you have already chosen a sink but aren’t confident in the measurements of it, an undermount sink template is probably for you!
Step #2: Trace Template Onto Surface
Simply remove any existing sinks and place your new template onto the surface where the old one was. Trace around it with a pencil, remove the template and you have your measurements!
Step #3: Install Sink Into Surface
Now that you know exactly where to install your new sink, get ready for an easy installation process. You will be sure to have a level surface on which to place your beautiful undermount sink when using one of these methods!
What to Consider Before You Measure the Undermount Sink
When it comes to measuring your sink, you need to keep in mind a few things.
#1: The size of your countertop.
This will help you determine the size of the sink that will fit best in your space. Some sinks are deeper than others, so be sure to take this into account when measuring. You’ll also want to make sure there is enough room for the faucet and spout.
#2: The size of the sink.
The standard sizes are 30 inches, 33 inches, and 36 inches. Keep in mind that these are rough estimates only because every single undermount sink is different. The best way to know for sure if your sink will fit on top of your countertop is to measure it yourself before you purchase it so there are no surprises when it arrives.
Measuring your sink can be a simple process if you know what to do and have the right tools on hand. If you don’t, measuring incorrectly will lead to poor results, so follow these guidelines carefully:
#3: A measuring tape.
You’ll need a good quality, flexible measuring tape that can measure in inches and/or centimeters if you choose to go with metric measurements as well. This will be the most important item on your list so make sure it is reliable before beginning your project! If you have an adjustable measuring tape, now would be the time to use it.
#4: A level.
You’ll need to use a level to make sure your sink is even with the rest of your countertop. This may seem like an unnecessary step, but it’s important for both function and appearance. You don’t want your sink looking lopsided in comparison to the rest of your kitchen!
#5: A pencil.
You’ll need a pencil to make your markings on the countertop. It’s easiest to do this before you remove the old sink so you have a reference point.
#6: A square.
If your sink has rounded corners, you’ll need a good quality square to help make accurate measurements. This is especially important if you’re planning on cutting the countertop yourself to accommodate the new sink.
The sink is the most important aspect of your kitchen, so be sure you take the time to measure correctly before purchasing one. By following these guidelines, you’ll be able to find the perfect undermount sink for your kitchen that will last for years to come!
#7: An Undermount Sink Template.
This is optional but highly recommended if you’re not confident in your measurements. A good quality template will ensure a perfect fit for your new sink and avoid any nasty surprises when it arrives! Just be sure to choose the right size before tracing around it onto your countertop.
#8: A Saw.
If you’re cutting your countertop to accommodate the new sink, you’ll need a saw. This is a job that’s best left to the professionals, but if you’re feeling adventurous and have some DIY skills, go for it! Be sure to measure twice (or even three times) before cutting so you don’t end up with an uneven surface.
#9: An adhesive.
To ensure your new sink stays securely in place, you’ll want to carefully apply an adhesive of some kind before placing it on top of the countertop surface. Some people use epoxy or silicone sealant while others prefer a more natural approach with pitch or resin glue. This is only necessary if you’re not attaching the sink with screws.
#10: Screws.
If you’re attaching your new sink with screws, you’ll need a drill and the appropriate size bit to make the holes. Be sure to use a level when drilling so your sink is perfectly straight! Once the screws are in place, it’s virtually impossible to move them so this is a step that should be taken seriously.
You can find all of these tools at your local hardware store or online retailer, but be sure to double-check the measurements before making any purchases so you don’t have issues when it comes time to install!
Tips to Perfectly Measure Your Undermount Sink
When it comes to measuring your sink, you need to keep in mind a few things.
- The size of the countertop.This will help you determine the size of the sink that will fit best in your space. Some sinks are deeper than others, so be sure to take this into account when measuring. You’ll also want to make sure that the faucet you choose will be compatible with the sink.
- The shape of your countertop.This may also influence your decision about what size sink to purchase. If you have a curved countertop, for example, you’ll likely want to choose a round or oval sink instead of a square one.
- Your plumbing configuration.There are two main types of plumbing configurations: single-bowl and double-bowl. If you’re not sure which one you have, take a look at your current sink. If it has two separate bowls, then you have a double-bowl configuration. If it’s one large bowl, then you have a single-bowl configuration.
- Your lifestyle.How you use your kitchen can also play a role in your decision about what size sink to choose. If you do a lot of cooking, you may want a larger sink that will give you more room to work. On the other hand, if you don’t cook as often, you may prefer a smaller sink that takes up less space.
- Your budget. Sinks can range in price from a few hundred dollars to well over a thousand, so be sure to set a budget before you start shopping.
- Your skills.If you’re not confident in your DIY skills, it may be a good idea to hire a professional to install your new sink for you. This is definitely something you’ll want to consider if you’re not comfortable with tools or if the installation process seems too complicated.
What to Do After Measuring The Undermount Sink
Once you’ve taken all of these factors into account, you should have a good idea about the size and shape of the sink that will work best for your kitchen. Now it’s time to start shopping!
Be sure to take your measurements with you when you go so you can find a sink that’s a perfect fit. And don’t forget to double-check all of the measurements before making a purchase so you don’t have any issues when it comes time to install.
If your sink doesn’t come with instructions, make sure to do some online research or contact customer service for assistance. Many manufacturers also offer installation videos on their websites if you’re having trouble visualizing how everything will fit together.
The installation process can seem daunting, but with a little bit of patience and some basic DIY skills, you should be able to get the job done like a pro.
DON'Ts While Measuring the Undermount Sink
- Don’t forget to take into account the size of your countertop and faucet when measuring!
- Don’t choose a sink that’s too big or too small for your space.
- Don’t assume that you have a single-bowl or double-bowl Check under your current sink to see which one you have!
- Don’t forget to double-check all of your measurementsbefore you go shopping!
- Don’t assume that the installation process is complicated. Many manufacturers offer customer service and online tutorials if needed.
- Don’t be afraid to ask for helpif you’re not comfortable with tools or the installation process. Most sink manufacturers have customer service representatives available to answer any questions you may have.
In Conclusion
This guide will help you determine the size of the undermount sink that is best for your kitchen. Also take into account the shape, plumbing configuration, lifestyle, budget, and skills when choosing a new one. After measuring everything up it’s time to buy!
TORVA Undermount Sinks are constructed with premium 16-gauge thick grade 304 stainless steel for durability and strength. Handcrafted brushed finish to prevent scratches for long-lasting use in your busy kitchen. Undermount installation provides you with much counter space, seamless transition and easy to clean corners make for a modern aesthetic and easier cleaning.
FAQs
A: The best way to measure your space is by using a flexible measuring tape and adding an extra half-inch for wiggle room. Write down the length, width, and depth of the area you need to fit your sink into so that it doesn’t slip or scratch anything during installation.
A: Sometimes, sinks and countertops come with a special cutout for your current faucet. This is especially important if you have a widespread or large-base faucet that needs extra room around it to operate properly. You’ll want to make sure there is enough space between the faucet and the edge of your sink.
A: A single-bowl sink has one large basin that can be used for washing dishes, prepping food, or rinsing produce. A double-bowl sink has two separate basins that can be used for washing dishes, prepping food, or rinsing produce. Double-bowl sinks are ideal when you have a high quantity of dirty dishes to clean at once or when there is more than one person in your household doing the cooking.
A: Most undermount sinks are made of 18-gauge stainless steel or fireclay material. There are also copper, porcelain enameled cast iron (PECI), and vitreous china options available. Each type has its own pros and cons that you should consider before choosing one for your space. Stainless steel is the most durable and affordable option, while copper offers a unique look that can’t be found with any other material.
A: The installation process for an undermount sink varies depending on the type of sink you choose, your DIY skills, and the tools you have available. Many manufacturers offer customer service and online tutorials if needed.
You’ll likely need a drill, screwdriver, tape measure, level, and pliers to complete the installation. In most cases, you will also have to cut your countertop to fit the new sink. If you’re not comfortable with tools or the installation process, don’t be afraid to ask for help. Most sink manufacturers have customer service representatives available to answer any questions you may have.
Download 2024 Catalog
